An injector is required to power most OM Series access points via Ethernet, and this rack mounted injector will power 12 access points with the included power supply (US Plug). It combines power from the power supply with Ethernet from your LAN switch or router and outputs a combined power and Ethernet signal compatible with the OM Series access points. Includes power supply.
Power is provided over pins 4+5 (+) and 7+8 (-).Note: This product is not compatible with MR Series or A Series access points.Note: The power supply will work internationally but includes a US plug only. You will require a plug adapter (not sold by Open-Mesh) for non-US plugs.
Additional Specs:Input: 100-240VAC frequency 50/60Hz surge<50/A/240V
Output: 18v voltage tolerance ±5%, ripple and noise(mVp-p)<1% output voltage, start time< 1s,hold up time> 20ms (input=240v, lo=100%) Build in over current, over load, short circuit protection, Recover automatically
Insulation: HI-PORT; 3000Vac/10mA 1 min
Operation temperature: 0~45℃, 5%~90%RH
Storage temperature: -20~85℃, 5%~95%RH, Altitude<3000M
Cooling: natural cooling
EMC: EN55022B, GB9254, FCC, VCCI
Safety accord: UL/cUL, FCC, TUV/GS, CE, SAA, KO, PSE, BSI
Dimensions: W482 x D21 x H42mm and L170 x W70 x H40mm IEC power connector with 50cm cord
- Additional Information
SKU POE12PORT Availability Usually ships same day Shipping Calculated at checkout Weight 2.9500